modem 3G / router 2314008

[fj.mesa.a]

Zuviel Werbung?
-> Hier kostenlos registrieren

Hello everyone!

I have a client that has a VPN network with a MGUARD and several Modem 3G. In the last modem installation I found a net analyzer EMPRO MA600 (with ethernet adapter) that is already connected to a PLC via ethernet. The EMPRO has IP 192.168.10.64 and below the Modem I have to set the IP in the 172.21.50.X segment. I know I can´t put two ethernet adapters to the EMPRO with diferents IPs, so my question: Can I use static routes in the modem 3G to reach the EMPRO with IP 192.168.10.64 through the IP 172.21.50.X??? If so, how should I do that??

Thanks!!

 

[gerribaldi]

Hi,

i´m not sure, but i think you can use 1:1 NAT. With that you can set the internal ip for the 3g modem to 192.168.10.0/24 and on the mguard site you can set the modem ip to 172.21.50.x

Innominate had some examples in there documentiation -> link to innominate

 

[Phoenix Contact]

Zuviel Werbung?
-> Hier kostenlos registrieren

Hello gerribaldi,

in this case please contact the Hotline +49 5281 9462888 or via E-Mail: automation-service@phoenixcontact.com.
For further support we also need a detailed network plan.

Best regards,

Michael

 

[gerribaldi]

Hi Michael,

i just respond to the post from fj.mesa.a, so he is the guy with the problem

@fj.mesa.a
Like Michael wrote, the best will be you contact the Phoenix Contact Hotline. The guys there are friendly, you get a fast answer and it´s free of charge.

Regards,
gerribaldi