KNX/EBI2S7 Demo project

[michielske]

Zuviel Werbung?
-> Hier kostenlos registrieren

Is there somebody here that has a demo project of KNX/EIB2S7?

I would like to test this software first before i order it.
It's pretty expensive.

I want to use it for my home domotics so i want to be sure first that it works like i want it to work.

I have already download the laste update of the driver:
Can be found here:
https://support.automation.siemens....tion=cssearch&searchinprim=0&nodeid0=10805608

I removed the block protection and did some reverse engineering.
I have communication with my IP siemens Gateway.
But reading out my sensors is not working yet.

Can somebody help me with that?

 

[IBFS]

Is there somebody here that has a demo project of KNX/EIB2S7?

The Package is divided in a Windows-Part and a S7-Part!

A Demoprojekt does not make sense because especially the
cyclic GA transmission is prepare by a separate Windows Toolset.
With this toolset and your exported GA-List from the ETS-Software
you have to prepare a Datablock for you S7. After this you have a
cyclic transmission for your selected GAs.
The second thing ist the sending or reading of GA by yourself.
For this you dont need the Windows-Tool.

Ich have the Version V0.9 and I have to say that the software
is nothing for S7 newcomers but is works.

Frank

 

[michielske]

Zuviel Werbung?
-> Hier kostenlos registrieren

Frank,

I have just bought me a siemens N148/22 gateway, a EIB powerbussupply and a switch for my home domotics system. I'm considering also implementing a PLC or KNX actuators. So i need to know first that everything works wel before i order that software package?
Does siemens have a demo version of this for limited use?
Or can you send one of your PLC projects to me?
Or can you make A S7 project for me with the following components:

Gateway:
IP-Interface N148/22

Switch:
Manufacturer: GIRA Giersiepen
Name: Drukcontact-busaankoppelaar enkelvoudig met twee.
Order Number: 184 00
BAU Type: BCU 1

This is my ETS 3 Exported grouplist:

"GroupAddress.Address";"MainGroup.Name";"MiddleGroup.Name";"GroupAddress.Name";"GroupAddress.Description";"GroupAddress.Comment";"Type";"SubType";"Length"
"_0/0/1";"test";"lamp";"test";"";"";"-1";"-1";"1"
"_0/0/2";"test";"lamp";"LED";"";"";"-1";"-1";"1"

I made 2 groupadresses in my ETS 3 project
so 3 lines in the exported CSV file

Thank you very much

 

[IBFS]

I can not give you a suitable Projekt because my version of
that KNX/EIB2S7 has the Version V0.9.
There is a huge difference between that and your focussed
actual V1.0-Version. In that Version SIEMENS made a lot of
changes compared to V0.9. The FB and FC-Numbers have
changed and also the code generator.
But be sure that the Software will work!

Frank

 

[michielske]

Frank

the code generator maybe changed but i think the v1.0 is still compatible with v 0.9 because siemens just put the communication block's online.
So users with v0.9 can upgrade to v1.0. So i think you can also use the online block for v1.0. The communication block are upgraded to be compatible with the N148//22 gateway and also other gateways.

I think the config DB and other remains the same.
I know that the software will work ofcourse but for me it is choosing between knx actuators or a plc. So i want to see the software work first before i buy i expensive piece of software i maybe never use.

Maybe your project is not really suitable for me but if you don't mind can you please send me and example of your projects?

Thanks

 

[michielske]

Zuviel Werbung?
-> Hier kostenlos registrieren

Frank,

Can you maybe generate the source with your editor.

My settings:

This is my ETS 3 Exported grouplist:
"GroupAddress.Address";"MainGroup.Name";"MiddleGroup.Name";"GroupAddress.Name";" GroupAddress.Description";"GroupAddress.Comment";"Type";"SubType";"Length"
"_0/0/1";"test";"lamp";"test";"";"";"-1";"-1";"1"
"_0/0/2";"test";"lamp";"LED";"";"";"-1";"-1";"1"

Ip adres plc:
192.168.6.150
Ip adres KNX gateway :
192.168.6.151

udp communications:
1: port 2000 ID = 1
2: port 2001 ID = 2
ID CP is W#16#0100

Thanks

 

[IBFS]

Can you maybe generate the source with your editor.

2 year ago I did this programming. Actually I have no Laptop where this
software is installed. I can only send you 2 German PDFs and MY Testprojekt for V0.9 which was running with my configuration.
The only thing you have do is, sending me a PN with a appropriate EMail address.

BUT once again ... the number structure in V0.9 is differnet to V1.0.
The Link above is only suitable for your N148 and has absolutly
nothing to do with any update regrading the software you looking for.
Unfortunatly there is no actual manual for V1.0 in my possession.

Frank

 

[taucherd]

Hello, i work with knx<>S7 v1.0 and works. send me your csv. file from ets and i generate the s7 project for testing.

 

[IBFS]

Zuviel Werbung?
-> Hier kostenlos registrieren

Hello, i work with knx<>S7 v1.0 and works. send me your csv. file from ets and i generate the s7 project for testing.

I was sending allready the testsfiles to michielske via PN and EMAIL.
So everything is running now.

Thats means - CASE CLOSED - for him.

Frank