-> Hier kostenlos registrieren
Hallo zusammen
Dieser Text wurde von Google übersetzt, ich hoffe, es ist verständlich. Ich poste hier, weil dies das beste Forum für Fragen zu SPS und Automatisierung zu sein scheint
Meine Frage:
Während ich einige Tests mit OPC UA auf einem wago PFC100 durchführte, stellte ich fest, dass meine Funktionsblockmethoden und -eigenschaften nicht im opc-Client (UAexpert) verfügbar waren.
Dies führte mich zu einem Blick auf die PLCopen- und OPC-Foundation "OPC-UA-Informationsmodell für IEC61131-3".
Ich kann keine Informationen zu den IEC61131-3-Methoden finden.
Es liegt auf der Hand, dass Funktionsblockmethoden auf OPC-UA-Methoden abgebildet werden sollten, damit bei der Exposition z. ein Motorobjekt (FB) mit den Methoden start () und stop (), diese Methoden stehen im opc-Client zur Verfügung.
Fehlt mir etwas?
Original text:
Hi all
This text is translated by google, hope it is understandable. I am posting here because this seems to be the best forum for plc and automation related questions
My question:
While making some tests with OPC UA on a wago PFC100 I found that my function block methods and properties where not available from the opc client (UAexpert)
This led me to having a look at the PLCopen and OPC foundation "OPC UA Information model for IEC61131-3".
I can not find any information regarding IEC61131-3 methods.
It seems obvious that function block methods should be mapped to OPC UA methods, so that when exposing ie. a motor object(FB) with start() and stop() methods, these methods are available from the opc client.
Am I missing something?
Dieser Text wurde von Google übersetzt, ich hoffe, es ist verständlich. Ich poste hier, weil dies das beste Forum für Fragen zu SPS und Automatisierung zu sein scheint
Meine Frage:
Während ich einige Tests mit OPC UA auf einem wago PFC100 durchführte, stellte ich fest, dass meine Funktionsblockmethoden und -eigenschaften nicht im opc-Client (UAexpert) verfügbar waren.
Dies führte mich zu einem Blick auf die PLCopen- und OPC-Foundation "OPC-UA-Informationsmodell für IEC61131-3".
Ich kann keine Informationen zu den IEC61131-3-Methoden finden.
Es liegt auf der Hand, dass Funktionsblockmethoden auf OPC-UA-Methoden abgebildet werden sollten, damit bei der Exposition z. ein Motorobjekt (FB) mit den Methoden start () und stop (), diese Methoden stehen im opc-Client zur Verfügung.
Fehlt mir etwas?
Original text:
Hi all
This text is translated by google, hope it is understandable. I am posting here because this seems to be the best forum for plc and automation related questions
My question:
While making some tests with OPC UA on a wago PFC100 I found that my function block methods and properties where not available from the opc client (UAexpert)
This led me to having a look at the PLCopen and OPC foundation "OPC UA Information model for IEC61131-3".
I can not find any information regarding IEC61131-3 methods.
It seems obvious that function block methods should be mapped to OPC UA methods, so that when exposing ie. a motor object(FB) with start() and stop() methods, these methods are available from the opc client.
Am I missing something?