Zuviel Werbung? - > Hier kostenlos beim SPS-Forum registrieren

Ergebnis 1 bis 3 von 3

Thema: DeviceNet Master eds File

  1. #1
    Registriert seit
    07.02.2008
    Ort
    Bessenbach
    Beiträge
    39
    Danke
    9
    Erhielt 1 Danke für 1 Beitrag

    Standard


    Zuviel Werbung?
    -> Hier kostenlos registrieren
    Hallo Community,

    ich bin auf der Suche nach irgendeinem (!) eds File für irgendeinen(!) DeviceNet Master. Ich möchte herausfinden, wie die Slavefunktionalität in dem eds File dargestellt wird, also wie die Ein und Ausgänge beschrieben sind.

    Grüße
    Tapio
    Zitieren Zitieren DeviceNet Master eds File  

  2. #2
    Registriert seit
    11.07.2004
    Beiträge
    1.597
    Danke
    10
    Erhielt 213 Danke für 183 Beiträge

    Standard

    Bei Rockwell findest Du die EDS-Files hier:
    http://www.rockwellautomation.com/resources/eds/

    Code:
    [File]
         DescText = "1756-DNB 1756 DeviceNet Scanner";
         CreateDate = 01-09-2006;
         CreateTime = 09:00:00;
         ModDate = 04-09-2008;
         ModTime = 09:42:42;
         Revision = 11.1;
         HomeURL = "http://www.ab.com/networks/eds/DN/0001000C000E0B00.eds";
     
     [Device]
         VendCode = 1;
         VendName = "Allen-Bradley";
         ProdType = 12;
         ProdTypeStr = "Communications Adapter";
         ProdCode = 14;
         MajRev    = 11;
         MinRev    = 1;
         ProdName    = "1756-DNB";
         Catalog        = "1756-DNB";
         Icon        = "1756enet.ico";    $ The EtherNet 1756 image is the same for DeviceNet
         1_RSNetWorx_DNetTool = "SdnCnfg.DnScannerDevice";
     
     [1_Scanner]
         MemoryTables = 2;    $ 1756
         SlaveMode    = 1;    $ We support SlaveMode
         SharedInputs = 1;    $ We support SharedInputs
         ADR          = 0xFFF80;    $ 1 Meg minus small overhead
         EKeyRevision = 1;    $ We support Electronic Keying to the revision level
         QuickConnect = 1;    $ We support QC
         AllowUpdatesInRunMode = 1;
     
     [Device Classification]
         Class1 = DeviceNet;
         Class2 = 1_RSNetWorx_1756,1_RSNetWorx_Not_Connectable_Module;
     
     [Port]
         Port1 = 1_1756_Chassis, "Backplane", "20 66 24 01",1;  $ port name must be Backplane for RSLinx
     
         Port2 =     DeviceNet,                  $ Port type
                         "A",                        $ Port name 
                         "20 03 24 01",              $ Path to Port object, The DNet object
                         2;                          $ Internal Port Number
     
         Port3 = 1_USB_Virtual_Backplane, "PCviaUSB", "21 00 00 03 24 01", 3;
     
     [Modular]
         Width  = 1;
         Rack1  = 1,0x6c,0x16,1,1,,,,0,1,2,3;                                    $1756-A4 Chassis, any slot
         Rack2  = 1,0x6c,0x17,1,1,,,,0,1,2,3,4,5,6;                              $1756-A7 Chassis, any slot
         Rack3  = 1,0x6c,0x18,1,1,,,,0,1,2,3,4,5,6,7,8,9;                        $1756-A10 Chassis, any slot
         Rack4  = 1,0x6c,0x19,1,1,,,,0,1,2,3,4,5,6,7,8,9,10,11,12;               $1756-A13 Chassis, any slot
         Rack5  = 1,0x6c,0x1A,1,1,,,,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16;   $1756-A17 Chassis, any slot
         Rack6  = 1,0x6c,0x16,2,1,,,,0,1,2,3;                                    $1756-A4 Chassis v2.1, any slot
         Rack7  = 1,0x6c,0x17,2,1,,,,0,1,2,3,4,5,6;                              $1756-A7 Chassis v2.1, any slot
         Rack8  = 1,0x6c,0x18,2,1,,,,0,1,2,3,4,5,6,7,8,9;                        $1756-A10 Chassis v2.1, any slot
         Rack9  = 1,0x6c,0x19,2,1,,,,0,1,2,3,4,5,6,7,8,9,10,11,12;               $1756-A13 Chassis v2.1, any slot
         Rack10 = 1,0x6c,0x1A,2,1,,,,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16;   $1756-A17 Chassis v2.1, any slot
     
     [Params]
         Param1 = 0,                $ Reserved
              6,                $ Link Path Size
              "20 90 24 01 30 10",        $ Link Path
              0x0000,            $ Descriptor
              0xC1,                $ Data Type 
              1,                $ Data Size 
              "AutoConfig Enable",        $ Parameter Name
              "",                 $ Units String
              "",                 $ Help String
              0,                $ Minimum Value
              1,                $ Maximum Value
              0,                $ Default Value   
               ,                $ Optional - Scaling Multiplier
               ,                $ Optional - Scaling Divider
               ,                $ Optional - Scaling Base
               ,                $ Optional - Scaling Offset
               ,                $ Optional - Multiplier Link
               ,                $ Optional - Divisor Link
               ,                $ Optional - Base Link
               ,                $ Optional - Offset Link
               ;                $ Optional - Decimal Precision
     
     
         Param2 = 0,                 $ Reserved
              6,                $ Link Path Size
              "20 90 24 01 30 11",        $ Link Path
              0x0000,            $ Descriptor
              0xC6,                 $ Data Type
              1,                 $ Data Size
              "Fixed Mapping Size Selection, Bytes per Node",    $ Parameter Name
              "",                $ Units String
              "",                 $ Help String
              1,                $ Minimum Value
              32,                $ Maximum Value
              4,                $ Default Value
               ,                $ Optional - Scaling Multiplier
               ,                $ Optional - Scaling Divider
               ,                $ Optional - Scaling Base
               ,                $ Optional - Scaling Offset
               ,                $ Optional - Multiplier Link
               ,                $ Optional - Divisor Link
               ,                $ Optional - Base Link
               ,                $ Optional - Offset Link
               ;                $ Optional - Decimal Precision
     
     
         Enum1 = 0,"Disabled", 1, "Enabled";
     
     
     [Connection Manager] 
        1_Display_Only_Connection1 =
           0x04010002,    $ trigger & transport 
                       $  0-15  = supported transport classes (class 1)
                       $  16 = cyclic (1 = supported)
                       $  17 = change of state (0 = not supported)
                       $  18 = on demand (0 = not supported)
                       $  19-23 = reserved (must be zero)
                       $  24-27 = exclusive owner
                       $  28-30 = reserved (must be zero)
                       $  31 = client 0 (don't care for classes 0 and 1)
           0x44240455,    $ point/multicast & priority & realtime format
                             $   0     = O=>T fixed (1 = supported)
                             $   1     = O=>T variable (0 = not supported)
                             $   2     = T=>O fixed (1 = supported)
                             $   3     = T=>O variable (0 = not supported)
                       $  4-5   = obsolete - value not changed for backwards compatibility
                       $  6-7   = obsolete - value not changed for backwards compatibility
                       $  8-10  = O=>T header (32-bit run/idle header)
                       $  11  = reserved (must be zero)
                       $  12-14 = T=>O header (pure data)
                       $  15  = reserved (must be zero)
                       $  16-19 = O=>T point-to-point
                       $  20-23 = T=>O multicast
                       $  24-27 = O=>T scheduled
                       $  28-31 = T=>O scheduled
           ,,,         $ O=>T RPI range,default,description (sizes in bytes)
           ,,,         $ T=>O RPI range,default,description (sizes in bytes)
           ,,          $ config part 1 (private configuration)
           ,,          $ config part 2 (module configuration)
           "Data",     $ connection name
           "Data connection.", $ Help string
           "20 04 24 01 2C 03 2C 02";           $ Path
     
        1_Display_Only_Connection2 =
           0x02010002,    $ trigger & transport 
                       $  0-15  = supported transport classes (class 1)
                       $  16 = cyclic (1 = supported)
                       $  17 = change of state (0 = not supported)
                       $  18 = on demand (0 = not supported)
                       $  19-23 = reserved (must be zero)
                       $  24-27 = input-only
                       $  28-30 = reserved (must be zero)
                       $  31 = client 0 (don't care for classes 0 and 1)
           0x44240355,    $ point/multicast & priority & realtime format
                             $   0     = O=>T fixed (1 = supported)
                             $   1     = O=>T variable (0 = not supported)
                             $   2     = T=>O fixed (1 = supported)
                             $   3     = T=>O variable (0 = not supported)
                       $  4-5   = obsolete - value not changed for backwards compatibility
                       $  6-7   = obsolete - value not changed for backwards compatibility
                       $  8-10  = O=>T header (heartbeat)
                       $  11  = reserved (must be zero)
                       $  12-14 = T=>O header (pure data)
                       $  15  = reserved (must be zero)
                       $  16-19 = O=>T point-to-point
                       $  20-23 = T=>O multicast
                       $  24-27 = O=>T scheduled
                       $  28-31 = T=>O scheduled
           ,,,         $ O=>T RPI range,default,description (sizes in bytes)
           ,,,         $ T=>O RPI range,default,description (sizes in bytes)
           ,,          $ config part 1 (private configuration)
           ,,          $ config part 2 (module configuration)
           "Status", $ connection name
           "Status connection.",    $ Help string
           "20 04 24 01 2C 04 2C 01";                     $ Path

  3. Folgender Benutzer sagt Danke zu Oberchefe für den nützlichen Beitrag:

    Tapio Bearking (07.07.2008)

  4. #3
    Registriert seit
    07.02.2008
    Ort
    Bessenbach
    Beiträge
    39
    Danke
    9
    Erhielt 1 Danke für 1 Beitrag

    Standard


    Zuviel Werbung?
    -> Hier kostenlos registrieren
    Danke schön

Ähnliche Themen

  1. DeviceNet
    Von Walter71 im Forum Feldbusse
    Antworten: 5
    Letzter Beitrag: 26.11.2009, 10:56
  2. S7 und Devicenet
    Von Black Scorpion im Forum Simatic
    Antworten: 4
    Letzter Beitrag: 21.10.2009, 21:00
  3. in Excel *.xls file als *.csv file abspeichern mit "Kommas"
    Von olitheis im Forum PC- und Netzwerktechnik
    Antworten: 13
    Letzter Beitrag: 20.03.2006, 12:25
  4. Bitte Hilfe bei Step7 Master-Master
    Von diabolo150973 im Forum Simatic
    Antworten: 8
    Letzter Beitrag: 20.02.2006, 13:30
  5. Master <-> Master Kommunikation über Profibus
    Von joker76 im Forum Feldbusse
    Antworten: 26
    Letzter Beitrag: 09.12.2004, 14:01

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •