pfc200 codesys 3.5 homeautomation hilfe gebraucht

[hschroyen]

Zuviel Werbung?
-> Hier kostenlos registrieren

Hallo forum leute,

Ich hoffe das ich hier auch etwas in english posten darf. Ich lese und spreche deutch aber das schreiben geht nicht so gut.

So :

I want to use a PFC200 running on codesys 3.5 to have a visu for my family.
My old PLC talked with https://home-assistant.io/ and was using https://home-assistant.io/components/sensor.http/
What I need is a way to talk to the PFC200. I need a way to verify the status of some variables and a way to modify them. (change the status of lights and to check if they are on or off)
I tried several things like MQTT https://home-assistant.io/components/sensor.mqtt/ but most of them failed as I am not sure which direction I should go.
Http get and post look promising but I never found an example or a way to get it working
Modbus is also possible in home-assistant but as far as I can see this is not possible in codesys 3.5...or am I wrong?
https://home-assistant.io/components/sensor.modbus/

So : could someone advice in which direction I should look? Somebody already tried this? My experience with codesys is very low so an example is highly appreciated.

Thanks in advance for your help.

I am pretty sure this would help a lot of people as I see on the home assistant page also people looking for a solution

Guten tag

Hschroyen

 

[Elektricks]

Hello,

I hope i understand you right:

do you work with e!cockpit or Codesys Target?
If you use e!cockpit you have to assign the modbus adresses in the modbus configurator.
See the Screenshots.
i didnt know how you make this without e!cockpit...
But you can use e!cockpit Trial Version with full features. Download on Wago Homepage after registration.

Hope i could helped.

 

[HausSPSler]

Zuviel Werbung?
-> Hier kostenlos registrieren

Hello,

If it is CODESYS V3 (maybe this works with e!Cockpit too) there is an implementation for mqtt

https://github.com/kmpm/OSC-MQTT


sure another option is using Modbus.
Attachend an Example how 2 CODESYS V3 Controller communicate by Modbus.

Best Regards