Ik kan het ook in het Nederlands schrijven als u dat liever heeft...maar dan kan u het waarschijnlijk niet meer lezen als authentieke westermann.
So I'll try to explain in English.
So we want to use a IM157 CPU as a profibus slave.
But the master is not a Siemens PLC.
We need a way to integrate the device as a common profibus device.
Question is...has anyone experience with this....or is this also not readable?
Ooops, ich nehme alles zurück und behaupte das Gegenteil!
Aber wenn das Niederländisch ist, bin ich fast Holländer. Das kann ich sogar sehr gut lesen. Das einzige Wort, mit dem ich nicht ganz klar komme ist: authentieke.
Gut wenn man ein wenig platt und dänisch kann....
So I'll try to explain in English.
So we want to use a IM157 CPU as a profibus slave.
But the master is not a Siemens PLC.
We need a way to integrate the device as a common profibus device.
Question is...has anyone experience with this....or is this also not readable?
Keep your shirt on!?!
Should be possible with the gsd-file for the IM157.
The IM157 is to be configurated with Step7 or COM-Profibus I guess, then import the gsd-file in your Profibus-Tool for Allen Bradley or the CP or what ever.
But I haven't done this before, sorry.
Ooops, ich nehme alles zurück und behaupte das Gegenteil!
Aber wenn das Niederländisch ist, bin ich fast Holländer. Das kann ich sogar sehr gut lesen. Das einzige Wort, mit dem ich nicht ganz klar komme ist: authentieke.
Meine Absicht war eigentlich nicht um sprachverwirrung zu schaffen.
Also hier mal wieder auf Deutsch.
Wir wollen ein System machen, austesten und unsere Kunde zuschicken.
Unsere Steuerung hat ein IM151-7 CPU.
Dass ist eigentlich eine s7 300 cpu mit Profibus anschluss (standard slave)
Es könnte genau so gut eine S7 315 2dp sein konfiguriert als slave.
Unsere slave steuert unseren Prozess und wird nachher als eigenständiges Gerät eingesetzt in eine (für uns) Fremdsteuerung.
In der simatik Manager kann man ein Austauschbereich für Master und slave konfigurieren für Befehle, Zustände usw.
Problem is jetzt, der Master ist für uns eine Fremdsteuerung ...warscheinlich Motorola oder so irgent was.
Meine ursprunglige Frage sollte eigentlich sein.
"Gibt es ne Möglichkeit um von das Austausbereich eine GSD datei zu schaffen, wobei der Fremdsteuerung zugriff auf das (von uns Konfigurierte) Kommunikationsbereich haben kann?
Also einfach GSD importieren und fertg.
Wir haben am sonsten nichts in der Fremdsteuerung zu kucken.
Met mijn verontschuldigingen voor de slechte Duitse gramatica.